Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
4073618
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Compression Helical Spring
Κωδικός ονόματος στοιχείου:
04226
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
0.540 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
E4 spring end, squared and ground both ends
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.750 inches
Spring Free Length:
Between 1.430 inches and 1.480 inches
MRC:
The length of a straight line which passes through the center of the accommodated rod,and terminates at the circumference.AHQJ
Accommodated Rod Diameter:
0.490 inches
MRC:
The number of coils included on the item.APCN
Coil Quantity:
9
MRC:
The rated load the item is designed to accommodate.ASZD
Load Rating:
Between 10.000 pounds and 14.000 pounds
MRC:
An indication of the coil helix direction.AXLH
Coil Helix Direction:
Right-hand or left-hand
MRC:
The weight,per specific measurement scale,required to deflect the spring.AXLP
Spring Deflection Rate:
75.000 pounds per inch
Spring Free Outside Diameter:
0.740 inches
MRC:
The specific extended or compressed spring length under maximum load.CSZP
Spring Length Under Load:
1.300 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy x-750
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5699 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Cylindrical
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
After coiling, precipitation heat treat per specification pwa 11-17 at 1200 deg. F porm 25 deg. For 4 hours