Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
006-10010
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Dust And Moisture Seal Boot
Κωδικός ονόματος στοιχείου:
19302
MRC:
The distance from the centerline to the axis of the item.ABGG
Radius:
Any acceptable
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
2.656 inches
MRC:
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the length.ABKQ
Center To Center Distance Between Mounting Facilities Parallel To Length:
2.062 inches
MRC:
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the width.ABKR
Center To Center Distance Between Mounting Facilities Parallel To Width:
0.750 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.969 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
2.218 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
0.050 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.138 inches
MRC:
The number of mounting devices used as a means of attaching the item.ACUP
Mounting Device Quantity:
4
MRC:
A measurement taken at right angles to the length of the base,in distinction from thickness.ACUU
Base Width:
1.593 inches
MRC:
The means of attaching the item.AXGY
Mounting Method:
Screw
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the base.BGKB
Baselength:
1.875 inches
First Distance From Mounting Hole Center To Base Edge:
0.262 inches
Distance From Inside Opening To Base Edge:
Any acceptable
Second Distance From Mounting Hole Center To Base Edge:
0.297 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber body
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Thru-hole
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81349-mil-b-5423 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
81349-mil-b-5423/14 government specification