Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
10925502
Πληροφορίες ανταλλακτικού
Additional cross drilled through hole first end, both holes in line; two flats second end, 1.125in. Flat lg, 180 degrees angle between flats; shaft chromium plated qq-c-320
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Straight Shaft
Κωδικός ονόματος στοιχείου:
22109
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Cross drilled hole and slotted
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Cross drilled hole and slotted
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
7.438 inches
First End Slot Width:
Between 0.390 inches and 0.395 inches
Second End Slot Width:
Between 0.600 inches and 0.605 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 0.9970 inches and 0.9980 inches
First End Slot Depth:
1.000 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the first end,and terminates at the circumference.AMDX
First End Hole Diameter:
Between 0.5000 inches and 0.5010 inches
First End Distance From Hole Center To End:
0.500 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 0.9970 inches and 0.9980 inches
Second End Slot Depth:
1.125 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the second end,and terminates at the circumference.AMGS
Second End Hole Diameter:
Between 0.3750 inches and 0.3770 inches
Second End Distance From Hole Center To End:
0.500 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
16.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1035 or steel comp 1038 or steel comp 1040
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-633 federal specification all material responses
