Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
11-878
Πληροφορίες ανταλλακτικού
Valve bypass hydr; valve, bypass thermal and pressure
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Pressure And Temper Relief Valve
Κωδικός ονόματος στοιχείου:
16996
MRC:
The basic material of which the body is fabricated.AAFZ
Body Material:
Aluminum alloy, qq-a-200/8, alloy 6061, t6
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off. plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the outside surface.AAJP
Outside Surface Treatment:
Anodized, mil-a-8625, type 2
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Straight thru
MRC:
The element, compound,or mixture of which the stem is fabricated,excluding any surface treatment.ABEP
Stem Material:
Aluminum alloy, qq-a-200/8, alloy 6061, t6
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-65.0 degrees fahrenheit and 320.0 degrees fahrenheit
MRC:
The type of service with which the item is designed to be used.ACKL
Media For Which Designed:
Oil
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the end flange.ACKT
First End Flange Shape Style:
Oval w/ bolt holes
MRC:
A measurement of the smallest dimension of the first end flange, in distinction from length or width.ACKU
First End Flange Thickness:
0.125 inches
MRC:
A measurement of the longest dimension of the first end flange, in distinction from width.ACKV
First End Flange Length:
1.812 inches
MRC:
A measurement taken at right angles to the length of the first end flange, in distinction from thickness.ACKW
First End Flange Width:
0.875 inches
First End Flange End Radius:
0.250 inches
MRC:
The number of bolt holes provided on the item.ACKZ
First End Bolt Hole Quantity:
2
MRC:
The length of a straight line which passes through the center of a bolt hole,and terminates at the circumference.ACLA
First End Bolt Hole Diameter:
0.221 inches
MRC:
Indicates whether or not the second end is identical to the first end.ACLR
Second End Relationship With First End:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ACLT
Second End Style Designator:
Grooved
MRC:
The element,compound,or mixture of which the seating surfaces are fabricated.ACSH
Seat Material:
Aluminum alloy, qq-a-200/8, alloy 6061, t6
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
0.798 inches
MRC:
The part that controls the flow through the item.ADQU
Flow Control Device:
Stem and integral disk
MRC:
Indicates the type of temperature control device that actuates the item.AFKX
Tempurature Control Device Type:
Thermostatic
First End Center To Center Distance Between Holes Along Length:
1.312 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Fully open: 165 degrees and below; starts to close: 165-180 deg; fully closed: 180 deg; fluid: mil-h-83282; valve cracking pressure: 40 psid max, at 190-195 degrees f; valve to reseat at 30 psid min
