Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
110c211-125c
Μονάδα μέτρησης:
No qup EA
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Drive Shank Hole Forming Cutter
Κωδικός ονόματος στοιχείου:
32727
MRC:
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.AAVL
Pilot Diameter:
0.234 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.AAZF
Shank Style:
Externally threaded
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.937 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the circumference.ABPM
Body Diameter:
0.615 inches
MRC:
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AHYM
Thread Diameter:
0.438 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the cutting end.AKZH
Cutting End Style:
Single end
MRC:
A designation that is used for the purpose of general identification of the cutting size.AKZL
Cutting Diameter:
0.2340 inches and 0.2982 inches and 0.6150 inches
MRC:
The direction in which the item is designed to rotate in order to cut.AKZV
Cutting Rotation Direction:
Right-hand
MRC:
The length of a straight line which passes through the center of a drill,and terminates at the circumference.ALAM
Drill Diameter:
0.298 inches
Drill Length:
2.625 inches
MRC:
The number of flutes provided.ALAR
Flute Quantity:
4
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Tapered reamer and integral pilot
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
Between 40.0 rockwell c and 53.0 rockwell c
MRC:
The number of threads per specific measurement scale.CQRN
Thread Quantity:
20 per inch
MRC:
The amount of taper of the reamer per specific measurement scale.CTBZ
Err Default:
Err default
MRC:
The amount of taper of the reamer per specific measurement scale.CTBZ
Reamer Taper:
0.250 inches per foot
Included Angle:
160.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp m7
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf
