Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
114d1064-1
Αποστρατιωτικοποίηση:
Yes - DEMIL/MLI
Πληροφορίες ανταλλακτικού
Three holes 0.499 in. Min, 0.508 in. Maximum diameter located 37.5, 155 and 205 degrees all diameters on common centerline concentric w/each other within 0.010 tir
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Seal Retainer
Κωδικός ονόματος στοιχείου:
50336
MRC:
The length of a straight line which passes through the center of a bolt circle,and terminates at the circumference.ABKG
Bolt Circle Diameter:
Between 9.740 inches and 9.760 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
Between 0.180 inches and 0.220 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Between 1.510 inches and 1.514 inches
MRC:
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.ABVL
Aperture Diameter:
Between 7.240 inches and 7.260 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
Between 8.817 inches and 8.818 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
10
MRC:
The length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.AHNX
Bolt Hole Diameter:
Between 0.281 inches and 0.288 inches
MRC:
The length of a straight line which passes through the center of the mounting flange,and terminates at the circumference.APTE
Mounting Flange Diameter:
Between 10.496 inches and 10.498 inches
Seal Seat Diameter:
Between 7.498 inches and 7.502 inches
Seal Seat Depth:
Between 0.453 inches and 0.457 inches
Shortest Distance Between Body End And Mounting Flange:
0.520 mils and 0.524 centimeters
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Magnesium alloy az91c
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-m-56, hta federal specification single material response
