Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
12383334
Πληροφορίες ανταλλακτικού
Pin, lock
NSN
Εθνικός αριθμός αποθέματος:
Κωδικός ονόματος στοιχείου:
02387
MRC:
The length of a straight line which passes through the center of the wire stock,and terminates at the circumference.ABPN
Wire Stock Diameter:
0.250 inches
Prong Length:
4.320 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Fighting vehicle system, bradley
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
End item carrier, command post; material, steel carbon, 1010 through 1025, specification astm a108; optional material steel, carbon, m1010 through m1025, specification astm a575, or steel carbon 1010 through 1025, astm a576 or steel carbon specification astm a36; remove all burrs and sharp edges; zinc nickel plate, type two, class two, per drawing 12369857 or zinc plate, type two per astm b633; dimentional limits apply after plating; parts may be locally heated to facilitate bending
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1010 or steel comp 1025
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astma108 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Zinc
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Astmb633 assn standard single treatment response
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
U shaped item; radius at curvature is 0.75; first bend 1.50 inches; both end chamfered; first end (curved) .09 inches chamfered with 40-50 degrees; second end cahmfered.12 inches with 55-65 degree angle; hole is 1.907 inches from second end; curve starts 3.44 inches from curved end
