Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
13217e2348
Αποστρατιωτικοποίηση:
Yes - DEMIL/MLI
Πληροφορίες ανταλλακτικού
Hub forward facecounterbored 4.023 in. Diameter for 0.500 in. D
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Marine Propeller
Κωδικός ονόματος στοιχείου:
30771
MRC:
A measurement taken at right angles to the length of a keyway,in distinction from thickness.ABRR
Keyway Width:
Between 0.751 inches and 0.753 inches
MRC:
A measurement from the top surface to the bottom of the keyway groove.ABRV
Keyway Depth:
Between 0.323 inches and 0.326 inches
MRC:
The number of keyways contained in or on the item.AEVE
Keyway Quantity:
1
MRC:
A measurement of the longest dimension of a keyway,in distinction from width.AFYS
Keyway Length:
9.750 inches
MRC:
The number of individual blades included.AJLB
Blade Quantity:
3
MRC:
An indication of the type of propeller.AMWD
Propeller Type:
Fixed pitch
MRC:
The direction in which an item is designed to rotate,when viewed axially.AMWW
Rotation Direction:
Right-hand
MRC:
The maximum allowable diameter of the circle produced by the extreme tip of the item.AMWY
Span Maximum Diameter:
3.667 feet
MRC:
The mean distance of forward movement for each revolution of the item.AMXB
Design Pitch:
3.000 feet
MRC:
An indication of the type of blade pitch.AMXG
Blade Pitch Type:
Constant
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the hub shaft accommodation.AMYP
Hub Shaft Accommodation Style:
Taperbore w/ keyway
Hublength:
Between 10.220 inches and 10.250 inches
Hub Forward Face Diameter:
Between 5.780 inches and 5.840 inches
Hub Aft Face Diameter:
Between 5.470 inches and 5.530 inches
MRC:
The length of a straight line which passes through the center of the largest portion of a tapered bore,and terminates at the circumference.ANAL
Taper Bore Major Diameter:
Between 3.374 inches and 3.376 inches
MRC:
The length of a straight line which passes through the center of the smallest portion of a tapered bore,and terminates at the circumference.ANAM
Taper Bore Minor Diameter:
Between 2.765 inches and 2.767 inches
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Steel, qq-s-681, class 65-35
MRC:
Designates the specific roughness rating representing the arithmetic average deviation of the surface from the meanline in a profile /the arithmetic average amount of deviation of the peaks and valleys from a meanline/ and its location on an item.ATNZ
Surface Finish And Location:
63.0 microinches
