Αριθμός ανταλλακτικού 134AVP20908-841

Access Cover

Τιμολόγηση και διαθεσιμότητα

Υποβάλετε αυτήν τη φόρμα για τις τρέχουσες τιμές και τη διαθεσιμότητα αυτού του NSN.
Αριθμός ανταλλακτικού:
Ποσότητα:
Διεύθυνση ηλεκτρονικού ταχυδρομείου:
Τηλέφωνο:
Αναφορά:
Εταιρεία:
Όνομα:

Δεν μοιραζόμαστε ούτε πουλάμε τις πληροφορίες σας σε κανέναν.
Μυστικότητα | Όροι

All major credit cards accepted as well as gov. p-cards

Η ιστορική τιμολόγηση για αυτό το προϊόν είναι μεταξύ 183.52 and 247.752 USD. Ανάλογα με την ποσότητα, τη διαθεσιμότητα, την κατάσταση, τον χρόνο παράδοσης και την πιθανή διακοπή ενός προϊόντος, δεν μπορούμε να εγγυηθούμε την τιμολόγηση μέχρι να σας παρέχουμε μια ενημερωμένη προσφορά.

Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
134avp20908-841
Αποστρατιωτικοποίηση:
Yes - DEMIL/MLI
Διάρκεια ζωής:
N/A
Μονάδα μέτρησης:
1 AY
NIIN:
010686740

Πληροφορίες ανταλλακτικού
Itwo each reinforcement beads molded into top of cover dim typical for both beads l 11.500 in.W 0.938 in.Protusion h 0.250 in.Located from side edge2.000 in.To center of bead-end of beadto edge of cover 1.000 in.Drain hole-dia 0.147 located lower left hand corner in top; upper end side has a rectangular slot opening-molded rolled flange with 0.125 in.Bend radius-protruding 0.188 in.Above end surface-dim of opening-w 3.000 in.-d 2.000 in.Inside corner rad 0.250 in.Located 0.688 in.From right hand side of cover to edge of slot; lower end side has a slot opening-molded rolled flange with 0.125 in.Bend radius-protruding 0.188 in.Above end surface-dim of opening w 1.750 in.Depth 1.875 in.To an inside end radius of slot 0.875 in.Slot located 2.938 in.From right hand side of cover to edge of slot; upper right hand side of cover has a slot opening located 0.438 in.Fromedge of slot to top edge of cover-dim of slot w 1.188 in.D 2.375 in.With inside corner rad 0.250 in.

NSN
Εθνικός αριθμός αποθέματος:
5340-01-068-6740 5340010686740
TXT
Περιγραφή:
Access Cover
INC
INC
Κωδικός ονόματος στοιχείου:
29785
INC
COM
Συμμόρφωση:
* ITAR Controlled
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Recess, same shape as the periphery
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.217 inches and 0.223 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
9.313 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.040 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, four holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
13.938 inches
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
0.062 inches
MRC:
None.ADNY
Distance Between Holes Along Length:
11.250 inches
MRC:
None.ADNZ
Distance Between Holes Along Width:
9.000 inches
MRC:
None.ADPC
Distance From First Hole Centerline To End Along Length:
1.125 inches
MRC:
None.ADPD
Distance From First Hole Centerline To End Along Width:
0.516 inches
MRC:
None.ADPN
First Recess Inside Height:
2.750 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.040 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Turnlock fastener
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic

Όμοιος Access Covers

« Commercial Hardware {lang[catalog]}
Σύγκριση τώρα»
Σαφής | Κρύβω