Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
155-073098-004
Πληροφορίες ανταλλακτικού
Immersion heater, flanged, main propulsion diesel engine lo sump tank heaterk tms-1516e4xx, 440v, 16kw, 1-3ph, 11wpsi
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Immer Electrical Heating Element
Κωδικός ονόματος στοιχείου:
11327
MRC:
The style designation indicating the configuration that most nearly corresponds to the mounting method of the item.AALX
Mounting Method Style:
Flange type mounting facility
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Flange, type
MRC:
The number of terminals for providing electrical connection to the item.AARA
Terminal Quantity:
8
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.875 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
44.000 inches
MRC:
An indication of the radiation spectrum of the element.ABJA
Element Radiation Specificationtrum:
Noninfrared
MRC:
Indicates the type of heat control included on the item.ABJM
Heat Control Type:
Thermocouple
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the element connection.ABJS
Element Connection Style:
Hermetically sealed stud
MRC:
A measurement of the longest dimension of a terminal,in distinction from width.ABJT
Terminal Length:
0.812 inches
MRC:
The environmental elements which a terminal box is designed to withstand satisfactorily.ABKF
Terminal Box Environmental Protection:
Explosion resistant and moisture resistant
MRC:
The length of a straight line which passes through the center of a bolt circle,and terminates at the circumference.ABKG
Bolt Circle Diameter:
9.500 inches
MRC:
The length of a straight line which passes through the center of a flange,and terminates at the circumference.ABKK
Flange Diameter:
11.000 inches
MRC:
The number of holes or slots included.ABKT
Hole Or Slot Quantity:
8
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
1.000 inches
MRC:
The number of heats at which the item will operate.ABNR
Heat Quantity:
1
MRC:
The heat output of the heated portion of the surface area of the heating element.ABNS
Watt Density Rating:
11.0 per square inch single voltage
Conduit Opening Size:
Between 0.750 inches and 1.500 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
Between 35.500 inches and 36.500 inches
MRC:
The maximum rated power that an item can safely consume or provide,measured in watts.AZQH
Maximum Wattage Rating In Watts:
16000.0 single voltage
MRC:
The number of elements in the item.BHHK
Element Quantity:
15
MRC:
The total electrical voltage,expressed in volts,and the type of current whether alternating or direct.CSBH
Voltage In Volts And Current Type:
440.0 ac single voltage
MRC:
The number of alternating current phases.FAAZ
Phase:
Single single voltage or three single voltage
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Designed to heat 1800 gallons or 2190 tep from 4 degrees c to 38 degrees c in 10.5 hours; terminals are hermetically sealed and designed to withstand hi-shock requirements of mil-std-901 and environmental vibration requirements of mil-std-167
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.0
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy e resistance wire
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel sheath
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm b344 assn standard single material response resistance wire
