Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
160d950825-87
Πληροφορίες ανταλλακτικού
Filler foam
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Cellular Plastic Material
Κωδικός ονόματος στοιχείου:
19975
MRC:
An indication of whether or not an object will remain substantially unchanged when subjected to extremely high temperatures.AAAU
Fire Retarding Characteristic:
Not fire retarding
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
16.090 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
6.790 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
24.370 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Aircraft, thunderbolt ii, a-10
MRC:
The condition of the item with respect to the texture of the surface.APEA
Surface Condition:
Rough
MRC:
An indication of the rated density of the item.BDNZ
Density Rating:
1.2 pounds per cubic foot
MRC:
The squeezing load an item can withstand without breaking at 25 percent deflection.CTLY
Compression Strength At 25 Pct Deflection:
0.35 pounds per square inch
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Irregularly shaped: see drawing for details; far side has 30 degree cutout along right/long edge (far side up) and roughly triangular cutout on left edge, 15 -30 degrees from top surface to bottom surface & is marked ""fwd" lengthwise along lower right edge & "up" & p/n lengthwise along upper left edge; near side has lengthwise cutout starting at bottom 30 degree cut, slanting up to point 2.00 from bottom & 15.84 from right, then to point 3.45 up & 11.65 from right, to 0.50 from top & 9.71 from rt, to top, 4.85 from rt, then to 0.50 from top at right edge; top surface has graduated lengthwise angles - see drawing; bottom edge has 30 degree crosswise cutout (o at far surface to 30 at top); there is a v-shaped cutout: 30 degrees toward bottom edge, 9.37 from bottom & 30 degrees toward top edge, 11.73 from bottom
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Plastic, polyurethane
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyurethane
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Material to be reticulated foam per sm-alc specification ms-mmrs-87-100
