Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
198g
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Engine Lathe
Κωδικός ονόματος στοιχείου:
03137
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Floor
MRC:
The center to center distance.ADQR
Center To Center Distance:
77.000 inches
MRC:
Indicates the performance capability of the item or component.AGLD
Performance Type:
Standard duty
MRC:
The purpose for which the item is designed.AKSL
Purpose For Which Designed:
General or toolroom
MRC:
The name and number of parts supplied with the item which may be required for application.AKYD
Accessory Components And Quantity:
Size loo long taper key drive spindle nose in lieu of regular camlock spindle nose; 23/8-6 threaded spindle nose in lieu of regular camlock spindle nose; special paint colors; metric transposing gears; inch/metric crossfeed and compound rest dials; taper attachment; preparing lathe for coolant; cooling equipment; fine feed hand wheel; screw feed doubletool slide; hardened taper tailstock spindle; hardened and ground cross feedand compound rest screws
MRC:
Indicates the design type of the item.APGF
Design Type:
Screw
MRC:
Indicates the type of bed provided.AWHA
Bed Type:
Permanent gap
MRC:
The number of spindle speeds provided.BTSZ
Spindle Speed Quantity:
8 or 16
MRC:
The minimum to maximum speed limits of the spindle,expressed in revolutions per minute.BTTB
Spindle Speed Range In Rpm:
+15.0/+980.0
MRC:
A measurement of the rated swing of the item.BTTD
Rated Swing:
Between 16.000 inches and 24.000 inches
MRC:
A measurement of the actual swing over the bed of the item.BTTF
Actual Swing Over Bed:
25.125 inches
MRC:
A measurement of the swing over the cross slide of the item.BTTG
Swing Over Cross Slide:
18.750 inches
MRC:
The number of thread changes provided.BTWB
Thread Change Quantity:
48
MRC:
Indicates the type of headstock drive provided for turning,rotating,or positioning the mechanism.BTWL
Headstock Drive Type:
Direct pulley, back geared or step cone pulley
MRC:
The industrial designation or term used to define the headstock center taper size.BTWM
Headstock Center Taper Size Designator:
3 morse
MRC:
The number of carriages provided.BTYQ
Carriage Quantity:
1
MRC:
The means used to operate the carriage longitudinal feed.BTYR
Carriage Longitudinal Feed Operation Method:
Hand and power
MRC:
The means used to operate the carriage cross feed.BTYS
Carriage Cross Feed Operation Method:
Hand and power
MRC:
Indicates the type of gear change provided.BTYW
Gear Change Type:
Plain or quick
MRC:
The minimum and maximum number of threads provided on the item.BTZR
Thread Quantity Range:
+4.0/+224.0 per inch
