Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
2135qtimax
Πληροφορίες ανταλλακτικού
2135qtimax short anvil
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Pneumatic Impact Wrench
Κωδικός ονόματος στοιχείου:
18426
MRC:
The different speeds at which the item may be operated.ABBB
Speed Adjustments:
Variable speed
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
187.0 millimeters
MRC:
Indicates the type of handle designed to be attached to or through an item for the purpose of opening,lifting,closing,or the like.ADQF
Handle Type:
Pistol grip
MRC:
The length of a straight line which passes through the center of a bolt,and terminates at the circumference.AHNY
Bolt Diameter:
0.500 inches
MRC:
An indication of the unit of measure and the numeric torque limit for which the item is designed.AJCG
Torque Capacity:
Between 68.0 meter-newton and 746.0 meter-newton
MRC:
The length of a straight line which passes through the center of the hose for which the item is designed,and terminates at the inside circumference.AJER
Hose Inside Diameter For Which Designed:
10.0 millimeters
MRC:
The number of impact blows which the item will make within a specific period of time.AKUL
Impact Blows Per Minute:
1250.0
MRC:
The nominal length of a straight line which passes through the center of the threaded air inlet, and terminates at the circumference.AKUM
Air Inlet Thread Diameter:
0.250 inches
MRC:
The level of a signal or sound relative to a specific distance,expressed in decibels.AQFK
Loudness Level In Decibels:
94.2
MRC:
A numeric value which indicates the size of the drive surface.ATNC
Drive Surface Size:
0.500 inches
MRC:
Indicates the type of drive end provided.BRZR
Drive End Type:
Male spindle
MRC:
The speed at which an item can be operated under a no load condition,expressed in revolutions per minute.BRZT
No Load Speed In Rpm:
9800.0
MRC:
An indication of the drive for which the item is designed.BRZX
Drive For Which Designed:
Straight
MRC:
The physical configuration of the drive end.CTCT
Drive End Shape:
Square
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Max power: 780 ft-lb (1054 nm) reverse torque from a tool weight3.95 lb (1.84 kg) - that is the best power-to-weight ratio in its class. Maximum control: feather-touch trigger, wider range of power regulator settings in forward, lways power in reverse, one-hand forward/ reverse control. Maximum reliability: free two-year limited warranty with tool. 2 year warranty at no additional cost.
