Αριθμός ανταλλακτικού 218770

Annular Ball Bearing

Τιμολόγηση και διαθεσιμότητα

Υποβάλετε αυτήν τη φόρμα για τις τρέχουσες τιμές και τη διαθεσιμότητα αυτού του NSN.
Αριθμός ανταλλακτικού:
Ποσότητα:
Διεύθυνση ηλεκτρονικού ταχυδρομείου:
Τηλέφωνο:
Αναφορά:
Εταιρεία:
Όνομα:

Δεν μοιραζόμαστε ούτε πουλάμε τις πληροφορίες σας σε κανέναν.
Μυστικότητα | Όροι

All major credit cards accepted as well as gov. p-cards

Η ιστορική τιμολόγηση για αυτό το προϊόν είναι μεταξύ 152.76 and 206.226 USD. Ανάλογα με την ποσότητα, τη διαθεσιμότητα, την κατάσταση, τον χρόνο παράδοσης και την πιθανή διακοπή ενός προϊόντος, δεν μπορούμε να εγγυηθούμε την τιμολόγηση μέχρι να σας παρέχουμε μια ενημερωμένη προσφορά.

Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
218770
Αποστρατιωτικοποίηση:
No
Διάρκεια ζωής:
N/A
Μονάδα μέτρησης:
1 EA
NIIN:
007245390

Πληροφορίες ανταλλακτικού
Flange on extended outer ring of bearing on the loading groove side, flange slotted 0.1240 in. Wide on vertical center line, 4 holes 0.0938 in. Diameter drilled on od of outer ring o.1400/0.1300 in. In from flange, 30 degrees above and below horizontal center line, inner ring counter bored to 0.8070/0.8060 in. Diameter on loading groove side of bearing, opposite side of inner ring chamfered o.0780 in. By 45 deg, bearing heat stabilized to operate at 350 deg, mark outlet on flange face, notch in inner ring bore, 15 degrees from vertical center line, 0.0460 in. Wide by 0.0060 in. Deep

NSN
Εθνικός αριθμός αποθέματος:
3110-00-724-5390 3110007245390
TXT
Περιγραφή:
Annular Ball Bearing
INC
INC
Κωδικός ονόματος στοιχείου:
00014
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 0.4630 inches and 0.4730 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 0.7298 inches and 0.7302 inches
MRC:
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.ADGA
Overall Outside Diameter:
Between 1.3745 inches and 1.3749 inches
MRC:
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.AGYE
Surface Finish:
Ground
MRC:
The direction of load with respect to the shaft axis.AGZC
Load Direction:
Radial
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Straight
MRC:
The clearance between the bearing rings and the rolling elements.AKVV
Internal Clearance:
0.0002 inches radial and 0.0008 inches radial
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel

Όμοιος Annular Ball Bearings

« Bearings Antifriction Unmounted {lang[catalog]}
Σύγκριση τώρα»
Σαφής | Κρύβω