Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
2508238
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Vehicular Universal Joint Yoke
Κωδικός ονόματος στοιχείου:
52120
MRC:
The length of a straight line which passes through the center of the largest diameter of the item,and terminates at the circumference.AAZR
Major Diameter:
1.225 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
1.560 inches
MRC:
The length of a straight line which passes through the center of the smallest diameter of the item,and terminates at the circumference.AGJR
Minor Diameter:
1.125 inches
MRC:
The measurement between specified points of the fork,in distinction from height.AKYX
Fork Depth:
1.457 inches
MRC:
The distance from the centerline of the universal joint spider to the hub end,measured along a line parallel to the longitudinal axis of the hub.AMBA
Length From Universal Joint Spider Centerline To Hub End:
2.780 inches
MRC:
The outside length of the machined surface finish measured along a line parallel to the longitudinal axis of the hub.AMBB
Hub Machined Surface Finish Outside Length:
1.033 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style (non-core):
Err-090
MRC:
A measurement from the bottom to the top of the fork, in distinction from depth.BRGT
Fork Height:
3.450 inches
MRC:
An indication of whether or not an outer periphery machined surface finish is included.BSYF
Outer Periphery Machined Surface Finish:
Included
MRC:
An indication of whether or not the hub end is threaded.BSYJ
Hub End Thread Provision:
Unthreaded
MRC:
An indication of whether or not a hub bore is included.BSYL
Hub Bore:
Included
MRC:
The physical configuration of the outside of the item.BTBZ
Outside Shape:
Round
Bearing Recess/keyway Depth:
0.700 inches
MRC:
Indicates the type of connection end on the item.BYRC
Connection End Type:
Hub
MRC:
The number of splines on the shaft.CZKU
Shaft Spline Quantity:
23
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator (non-core):
Err-090