Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
2c6-200
Πληροφορίες ανταλλακτικού
1st gear data: pressure angle 20.0000 deg.; diametral pitch 24; class agma 12; ratio 49.65: 1; 2nd gear data: teeth 140; diametral pitch 96; pressure angle 20.0000 deg.; pitch diameter 1.4583; diameter 1.479; length 0.112 dia.; 4 mounting holes 0.164-32 unc-2b socket head screws
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Gearcase-motor
Κωδικός ονόματος στοιχείου:
01102
MRC:
The distance measured in a straight line from the bottom to the top of an item.AAJT
Overall Height:
5.610 inches
MRC:
A measurement of the longest dimension of an item,in distinction from width.AAJU
Overall Length:
3.720 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.AAJV
Overall Width:
1.910 inches
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
0.750 inches single end
MRC:
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.ABWV
Shaft Diameter:
0.833 inches single end
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Dc output
MRC:
The number of teeth included on the item.AJLA
Teeth Quantity:
18 single end
MRC:
The direction of rotation of a rotating shaft as viewed from the drive end.AKCT
Shaft Rotation Direction:
Clockwise single end or counterclockwise single end
MRC:
The working period under which the item was designed to operate.AKPS
Duty Cycle:
Continuous
MRC:
An indication of the feature/s/ of the inclosure.ANPZ
Inclosure Feature:
Totally enclosed
MRC:
Indicates the type and number of facilities by which the item is mounted.AXHR
Mounting Facility Type And Quantity:
4 threaded hole
MRC:
The drive shaft position as related to the armature axis.BFLY
Geared Head Output Shaft Alignment Position:
Inline w/rotor axis single end
Full Tooth Length:
1.280 inches single end
MRC:
Indicates the torque rating,and its type.BKPH
Torque Rating And Type:
300.0 inch-ounces stalled
MRC:
The amount of electrical energy that can be dissipated.CNXS
Power Rating:
45.0 watts output
MRC:
A measurement of the longest dimension of the shaft projection of an item,in distinction from width.CWCS
Length Of Shaft From Housing:
1.280 inches single end
MRC:
The temperature at which the item is designed to operate.CWDY
Tempurature Rating:
25.0 ambient degrees celsius
MRC:
The nominal center to center distance between the mounting facilities parallel to the width.CWFY
Center To Center Distance Between Mounting Facilities Parallel To Width:
1.220 inches
MRC:
The nominal center to center distance between the mounting facilities parallel to the height.CWGD
Center To Center Distance Between Mounting Facilities Parallel To Height:
1.420 inches
MRC:
The amount of current for which an item is rated,expressed in amperes.CWGL
Current Rating In Amps:
2.250 second multiple output
MRC:
Indicates the type of connection,rating sequence,and voltage rating at which the item is designed to operate,expressed in volts.CWGQ
Connection Type And Voltage Rating In Volts:
34.5 line to neutral single output
MRC:
The speed rating of the geared head output shaft(s).CWHK
Geared Head Output Shaft Speed Rating:
160.000 single revolutions per minute single end
MRC:
An indication of the characteristic(s) of the shaft end.CWHZ
Shaft End Characteristic:
A17 single style single end
MRC:
The number of alternating current phases.FAAZ
Phase:
Two output
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
400.0 output
