Αριθμός ανταλλακτικού 30A1438ISSUEA

Snapslide Fastener

Τιμολόγηση και διαθεσιμότητα

Υποβάλετε αυτήν τη φόρμα για τις τρέχουσες τιμές και τη διαθεσιμότητα αυτού του NSN.
Αριθμός ανταλλακτικού:
Ποσότητα:
Διεύθυνση ηλεκτρονικού ταχυδρομείου:
Τηλέφωνο:
Αναφορά:
Εταιρεία:
Όνομα:

Δεν μοιραζόμαστε ούτε πουλάμε τις πληροφορίες σας σε κανέναν.
Μυστικότητα | Όροι

All major credit cards accepted as well as gov. p-cards

Η ιστορική τιμολόγηση για αυτό το προϊόν είναι μεταξύ 15.54 and 20.979 USD. Ανάλογα με την ποσότητα, τη διαθεσιμότητα, την κατάσταση, τον χρόνο παράδοσης και την πιθανή διακοπή ενός προϊόντος, δεν μπορούμε να εγγυηθούμε την τιμολόγηση μέχρι να σας παρέχουμε μια ενημερωμένη προσφορά.

Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
30a1438issuea
Αποστρατιωτικοποίηση:
No
Διάρκεια ζωής:
N/A
Μονάδα μέτρησης:
1 EA
NIIN:
001716345

Πληροφορίες ανταλλακτικού
Drilled stud head

NSN
Εθνικός αριθμός αποθέματος:
5325-00-171-6345 5325001716345
TXT
Περιγραφή:
Snapslide Fastener
INC
INC
Κωδικός ονόματος στοιχείου:
17527
MRC:
A measurement of the longest dimension of the shank,in distinction from width.AATR
Shank Length:
0.093 inches
MRC:
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.AAVH
Shoulder Diameter:
0.187 inches
MRC:
The length of the enlarged portion/s/ located on the shank of the item.AAVK
Shoulder Length:
0.078 inches
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
0.125 inches
MRC:
A measurement between specified points of the hole,in distinction from height.AAZQ
Hole Depth:
0.094 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
0.159 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
0.032 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.093 inches
MRC:
The length of a straight line which passes through the center of a neck,and terminates at the circumference.ADCL
Neck Diameter:
0.125 inches
MRC:
An inside measurement taken at right angles to the length of an item,in distinction from thickness.ADJT
Inside Width:
0.266 inches
MRC:
The length of a straight line which passes through the center of the shank,and terminates at the outside circumference.AGGZ
Shank Outside Diameter:
0.078 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the latch.AGPR
Latch Style:
Flat turned-up end
MRC:
None.AGPS
Latchlength:
0.600 inches
MRC:
None.AGPT
Notch Diameter:
0.130 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the latch guide.AGPU
Latch Guide Style:
Round end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the snapslide post.AGPV
Snapslide Post Style:
Post
MRC:
None.AGPW
Head Outside Diameter:
0.219 inches
MRC:
The length of a straight line which passes through the center of the shoulder,and terminates at the outside circumference.AGPX
Shoulder Outside Diameter:
0.125 inches
MRC:
None.AGPY
Post Shoulder Length:
0.045 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the snapslide stud.AGPZ
Snapslide Stud Style:
Stud
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the largest circumference.AGQA
Largest Diameter:
0.187 inches
MRC:
A measurement of the longest dimension of the neck,in distinction from width.AGQB
Neck Length:
0.045 inches
MRC:
A measurement of the longest dimension of the stud,in distinction from width.AGXF
Stud Length:
0.346 inches
MRC:
None.ALBQ
Post Shank Length:
0.095 inches
MRC:
A measurement of the longest dimension of the guide,in distinction from width.AQWP
Guide Length:
0.609 inches
MRC:
None.CHPL
Guide Hole Diameter:
0.082 inches
MRC:
An overall measurement taken at right angles to the length of the latch, in distinction from thickness.CRKM
Latchwidth:
0.240 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy latch
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy latch guide
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy post
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy stud
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy washer
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Nickel

Όμοιος Snapslide Fasteners

« Fastening Devices {lang[catalog]}
Σύγκριση τώρα»
Σαφής | Κρύβω