Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
31
Πληροφορίες ανταλλακτικού
Trimmer dental model 115v 60 hz ac 13x12x15.5"
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Dental Model Trimmer
Κωδικός ονόματος στοιχείου:
13887
MRC:
An overall measurement between specified points of an item,in distinction from height.ABFY
Overall Depth:
15.500 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
13.000 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
12.000 inches
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The name and number of those parts furnished with the item of supply that have not been specified elsewhere.AKYN
Furnished Items And Quantity:
Power cable 3-conductor 3 prong plug 5 ft long 1; 3 blade male connector 1; on-off switch 1; cup caster rubber 4; hose drain 2.500 ft long 1; wheel abrasive diameter 10 in (25.4 cm) by 1/4 in. (0.64 cm) wide 1; table work adjustable and removable 1 tube water inlet 4 ft lg 1
MRC:
The value(s) of potential for which the item is rated.AMSE
Voltage Rating:
115.0 volts
MRC:
An indication of the rated horsepower of the item.ANCY
Horsepower Rating:
0.333
MRC:
The amount of electrical energy that can be dissipated.ANPT
Power Rating:
225.0 watts
MRC:
The frequency at which the item functions.APTT
Operating Frequency:
60.0 hertz
MRC:
The rated speed f0r which the item has been tested to perform,expressed in revolutions per minute.AYQD
Rated Speed In Rpm:
1725.0
MRC:
A measurement of the longest dimension of the grinding surface,measured at the opening of the item.CJYJ
Err Default:
Err default
MRC:
A measurement of the longest dimension of the grinding surface,measured at the opening of the item.CJYJ
Grinding Surface Length At Opening:
5.000 inches
MRC:
A measurement taken at right angles to the length of the grinding surface,measured at the opening of the item.CJYK
Err Default:
Err default
MRC:
A measurement taken at right angles to the length of the grinding surface,measured at the opening of the item.CJYK
Grinding Surface Width At Opening:
4.000 inches
MRC:
An indication of whether or not a waste receiving reservoir is provided.CLGS
Err Default:
Err default
MRC:
An indication of whether or not a waste receiving reservoir is provided.CLGS
Waste Receiving Reservoir:
Provided
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
FORR-EP-LAC-EMEN
