Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
343as253-1
Πληροφορίες ανταλλακτικού
Symmetrical flats 0.760 inch wide on shoulder places; groove 0.750 inch diameter 0.220 inch long adjoining head
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Headed Shoulder Pin
Κωδικός ονόματος στοιχείου:
16563
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Thumb no. 3
Under Head Length:
Between 1.840 inches and 1.920 inches
First Step Diameter:
Any acceptable
First Step Length:
Between 0.650 inches and 0.730 inches
Second Step Diameter:
Between 0.450 inches and 0.468 inches
Second Step Length:
1.190 inches
MRC:
A measurement taken at right angles to the length of a head,in distinction from thickness.ABQX
Head Width:
Any acceptable
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
Drilled through head
First Hole Diameter:
Between 0.368 inches and 0.382 inches
Distance From Centerline Of Hole To End Of Pin:
1.740 inches
First End Taper Length:
0.100 inches
First End Taper Angle:
45.0 degrees
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Any acceptable
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4130
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-6758 military specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium and chromate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-416, type 2 cl 1 federal specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shoulder
