Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
3847as404-1
Πληροφορίες ανταλλακτικού
Ring, tiedown
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Aircraft Floor Tie Down Adapter
Κωδικός ονόματος στοιχείου:
19936
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
3.000 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.630 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
1.000 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
3.000 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.406 inches
MRC:
Indicates the type of holes provided in the item to facilitate mounting to another item.ACHY
Mounting Hole Type:
Plain
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the ring.ACXD
Ring Style:
Round
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting hole(s).ADFU
Mounting Hole Arrangement Style:
Four hole rectangular
MRC:
The longest distance between mounting centers parallel to the horizontal plane.AFDS
Longest Horizontal Distance Between Mounting Centers:
2.500 inches
MRC:
The longest distance between mounting centers parallel to the vertical plane.AFDV
Longest Vertical Distance Between Mounting Centers:
2.000 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Model a/m32k-10 and a/m32u-21
MRC:
The maximum rated load the item is designed to accommodate.AYXK
Maximum Load Rating:
11000.0 pounds
MRC:
Indicates the type of attachment provided.BDHD
Attachment Type:
Bolt
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Matl for base is alloy steel iaw astm a514, gr b (t-1); ring iaw pmp11211; item is zinc plated per astm b633, sc-3, ty iv; refer to drawing for additional details
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Zinc
