Αριθμός ανταλλακτικού 3M1262C6D16-6A

Close Tolerance Screw

Τιμολόγηση και διαθεσιμότητα

Υποβάλετε αυτήν τη φόρμα για τις τρέχουσες τιμές και τη διαθεσιμότητα αυτού του NSN.
Αριθμός ανταλλακτικού:
Ποσότητα:
Διεύθυνση ηλεκτρονικού ταχυδρομείου:
Τηλέφωνο:
Αναφορά:
Εταιρεία:
Όνομα:

Δεν μοιραζόμαστε ούτε πουλάμε τις πληροφορίες σας σε κανέναν.
Μυστικότητα | Όροι

All major credit cards accepted as well as gov. p-cards

Η ιστορική τιμολόγηση για αυτό το προϊόν είναι μεταξύ 98 and 132.3 USD. Ανάλογα με την ποσότητα, τη διαθεσιμότητα, την κατάσταση, τον χρόνο παράδοσης και την πιθανή διακοπή ενός προϊόντος, δεν μπορούμε να εγγυηθούμε την τιμολόγηση μέχρι να σας παρέχουμε μια ενημερωμένη προσφορά.

Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
3m1262c6d16-6a
Αποστρατιωτικοποίηση:
No
Διάρκεια ζωής:
N/A
Μονάδα μέτρησης:
5 EA
NIIN:
015143443

Πληροφορίες ανταλλακτικού
Bolt, 100 degree reduced heard, gear drive recess-special thread length, inconel 718 (125 ksi shear)

NSN
Εθνικός αριθμός αποθέματος:
5305-01-514-3443 5305015143443
TXT
Περιγραφή:
Close Tolerance Screw
INC
INC
Κωδικός ονόματος στοιχείου:
29294
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.375 inches
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
1.375 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat countersunk
MRC:
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.AASL
Head Diameter:
Between 0.550 inches and 0.560 inches
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
0.221 inches
MRC:
The length of a straight line which passes through the center of the grip,and terminates at the circumference.AAUR
Grip Diameter:
0.374 inches
MRC:
The length of a straight line which passes through the center of the shank unthreaded hole,and terminates at the inside circumference.AAWB
Shank Unthreaded Hole Diameter:
0.106 inches first hole
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.ABQZ
Internal Drive Style:
Torx
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F-18 aircraft
MRC:
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AHYM
Thread Diameter:
0.375 inches
MRC:
A measurement of the longest dimension of the grip,in distinction from width.ANEE
Grip Length:
1.000 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
24
MRC:
The included angle of the countersink.CRSQ
Countersink Angle:
Between 99.0 degrees and 101.0 degrees
MRC:
The distance from the shank hole centerline to the largest bearing surface of the head.CRZS
Distance From Head Largest Bearing Surface To Shank Hole Center:
1.260 inches first hole
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Redefined head geometry
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy 718
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unjf

Όμοιος Close Tolerance Screws

« Screws {lang[catalog]}
Σύγκριση τώρα»
Σαφής | Κρύβω