Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
46-168918g50
Αποστρατιωτικοποίηση:
Yes - DEMIL/MLI
Πληροφορίες ανταλλακτικού
Monitrol 15/90 asm
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Circuit Card Assembly
Κωδικός ονόματος στοιχείου:
61638
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
5.400 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
1.208 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
4.500 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
6525-01-159-3009, field radiographic/fluoroscopic x-ray system; model dxd 350 ii
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Major components: printed wiring board 1; rectifier 200prv 3; relay 120vac 1; rectifier 400prv 2; resistor 1; relay 24 vdc 3; rectifier 200v 4; capacitor 1; clamp 5; terminal 20; socket 5; mounting configuration: two 0.177 in. Diameter holes on 5.000 in. By 0.200 in. Centers; two 0.177 in. Diameter holes on 4.100 in. By 5.000 in. Centers; cubic measure: 29.354 cubic inches; unpackaged unit weight: 1.730 pounds; purchase description: 24456-46-168918g50
MRC:
An indication of the precious material and its location in the item.PMLC
Precious Material And Location:
Buttons gold and buttons silver
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
24456-46-168918-t drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
