Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
475124
Πληροφορίες ανταλλακτικού
Undercut at end of internal thd 0.115 in. Min/0.135 in. Maximum w, 1.188 in. Min/1.217 in. Maximum dia, two lockwire holes 0.065 in. Min/0.075 in. Maximum diameter drilled through opposite corner of hex
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Tube Coupling Nut
Κωδικός ονόματος στοιχείου:
03859
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3b
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
The process used in manufacturing the item.AARN
Fabrication Method:
Any acceptable
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.ACTA
Nut Style:
Tube coupling
Nut Height:
Between 1.190 inches and 1.210 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Aircraft application
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
Between 1.364 inches and 1.377 inches
Length To Shoulder:
Between 0.990 inches and 1.010 inches
MRC:
The smallest length of a straight line which passes through the center of the two surfaces of a circular item,and terminates at the inside circumference.BSPX
Smallest Inside Diameter:
Between 0.887 inches and 0.893 inches
MRC:
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.BZRR
Thread Series:
Un
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
12
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
1.187 inches
MRC:
The nominal length of a straight line which passes through the center of a tube,and terminates at the outside circumference.CQRJ
Tube Outside Diameter:
0.750 inches
Seat Angle:
45.00 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 347
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5646 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Silver
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Ams 241 assn standard single treatment response
