Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
4g19060-101a
Πληροφορίες ανταλλακτικού
Has three holes equally spaced through sides of wrenching facility w/dia. Of 0.069 in. Min. And 0.074 in. Max.
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Machine Thread Bushing
Κωδικός ονόματος στοιχείου:
18019
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
The included angle of the countersink,expressed in degrees.AATA
Countersink Angle In Deg:
90.0
MRC:
The included angle of the countersink,expressed in degrees.AATA
Countersink Angle In Deg:
90.0 wrenching end, first countersink
MRC:
The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.AAWY
Counterbore Diameter:
Between 0.625 inches and 0.630 inches
MRC:
The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.AAWY
Counterbore Diameter:
0.625 inches and 0.630 inches wrenching end, first counterbore
MRC:
The depth of the process used to enlarge part of a hole.AAWZ
Counterbore Depth:
0.290 inches
MRC:
The depth of the process used to enlarge part of a hole.AAWZ
Counterbore Depth:
0.290 inches wrenching end, first counterbore
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 0.710 inches and 0.730 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
Between 0.330 inches and 0.350 inches
MRC:
The physical configuration of the facility utilized to assemble or disassemble the item.ACSL
Wrenching Facility Shape:
Hexagon
MRC:
The measurement of the process used to enlarge part of a hole,in distinction from height.ADBD
Countersink Depth:
0.096 inches
MRC:
The measurement of the process used to enlarge part of a hole,in distinction from height.ADBD
Countersink Depth:
0.096 inches wrenching end, first countersink
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Landing gear specific
MRC:
A measurement of the extent of screw threads,including incomplete screw threads,along a line parallel to the longitudinal thread axis.AJYR
Screw Thread Length:
0.309 inches
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
1.000 inches
MRC:
Indicates the location of the counterbore on the item.BDYS
Counterbore Location:
Wrenching end
MRC:
Indicates the location of the countersink on the item.BQDD
Countersink Location:
Wrenching end
MRC:
The length of a straight line which passes through the center of the hole,and terminates at the inside circumference.BXBR
Hole Inside Diameter:
Between 0.3765 inches and 0.3785 inches
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Counterbore and countersunk
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
14
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.875 inches
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Agav
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 2024
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-225/6, t351 federal specification single material response
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf
