Αριθμός ανταλλακτικού 513902-2

Flexible Shaft Coupling

Τιμολόγηση και διαθεσιμότητα

Υποβάλετε αυτήν τη φόρμα για τις τρέχουσες τιμές και τη διαθεσιμότητα αυτού του NSN.
Αριθμός ανταλλακτικού:
Ποσότητα:
Διεύθυνση ηλεκτρονικού ταχυδρομείου:
Τηλέφωνο:
Αναφορά:
Εταιρεία:
Όνομα:

Δεν μοιραζόμαστε ούτε πουλάμε τις πληροφορίες σας σε κανέναν.
Μυστικότητα | Όροι

All major credit cards accepted as well as gov. p-cards

Η ιστορική τιμολόγηση για αυτό το προϊόν είναι μεταξύ 180.32 and 243.432 USD. Ανάλογα με την ποσότητα, τη διαθεσιμότητα, την κατάσταση, τον χρόνο παράδοσης και την πιθανή διακοπή ενός προϊόντος, δεν μπορούμε να εγγυηθούμε την τιμολόγηση μέχρι να σας παρέχουμε μια ενημερωμένη προσφορά.

Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
513902-2
Αποστρατιωτικοποίηση:
No
Διάρκεια ζωής:
N/A
Μονάδα μέτρησης:
1 EA
NIIN:
002527635
NSN
Εθνικός αριθμός αποθέματος:
3010-00-252-7635 3010002527635
TXT
Περιγραφή:
Flexible Shaft Coupling
INC
INC
Κωδικός ονόματος στοιχείου:
04459
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.082 inches both ends
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
0.2300 inches first end
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
0.2320 inches second end
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
0.2530 inches first end
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
0.2610 inches second end
MRC:
The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.AAWY
Counterbore Diameter:
0.2700 inches both ends
MRC:
The depth of the process used to enlarge part of a hole.AAWZ
Counterbore Depth:
0.2475 inches both ends
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 1.437 inches and 1.452 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
0.843 inches
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the tapered portion,and terminates at the circumference.ABQA
Taper Minor Diameter:
0.3750 inches both ends
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
19 both ends
MRC:
Designates the thread diameter and number of threads per specific measurement scale.ABVK
Thread Size Designator:
No. 6/0.138 in./-32 thd size both ends
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.3750 inches both ends
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
0.3900 inches both ends
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Tapered first end
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Tapered second end
MRC:
The element, compound, or mixture of which the bellows are fabricated, excluding any surface treatmentAJGA
Bellows Material:
Stainless steel
MRC:
Indicates the design type of the item.APGF
Design Type:
Bellows
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
0.250 inches both ends
MRC:
The means by which the item is secured.BSNP
Securing Method:
Unthreaded hole second end
MRC:
The means by which the item is secured.BSNP
Securing Method:
Threaded hole first end
MRC:
The number of threaded holes provided.BSNQ
Threaded Hole Quantity:
1 both ends
MRC:
Indicates the location of a threaded hole on the item.BSNR
Threaded Hole Location:
Both ends: one hole located 90 degrees from unthreaded hole
MRC:
The number of unthreaded holes provided.BSNS
Unthreaded Hole Quantity:
2 both ends
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Counterbore
MRC:
The length of a straight line which passes through the center of the largest portion of the taper,and terminates at the circumference.CFGD
Taper Largest Diameter:
0.3750 inches both ends

Όμοιος Flexible Shaft Couplings

« Torque Converters and Speed Changers {lang[catalog]}
Σύγκριση τώρα»
Σαφής | Κρύβω