Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
52674-6
Πληροφορίες ανταλλακτικού
Longitudinal hole in shank 0.213 in. Dia, 1.060 in. Dp with tap 0.250-28 unf-2b 0.380 in. Dp, second hole 0.125 in. Diameter 0.720 in. Dp 0.940 in from shank end perpendicular to longitudinal hole
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Headed Grooved Pin
Κωδικός ονόματος στοιχείου:
02382
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 1.248 inches and 1.249 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
1.550 inches
Undercut Diameter:
Between 1.170 inches and 1.180 inches
Under Head Length:
Between 1.690 inches and 1.720 inches
Undercut Width:
Between 0.056 inches and 0.060 inches
First End Taper Length:
0.030 inches
First End Taper Angle:
45.0 degrees
Pin Head Diameter:
1.380 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches all other surfaces
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches long shank
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches undercut
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.060 inches and 0.090 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4140
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-416, type 2, class 2 federal specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
