Αριθμός ανταλλακτικού 596-7409351-27

Nonmetallic Angle

Τιμολόγηση και διαθεσιμότητα

Υποβάλετε αυτήν τη φόρμα για τις τρέχουσες τιμές και τη διαθεσιμότητα αυτού του NSN.
Αριθμός ανταλλακτικού:
Ποσότητα:
Διεύθυνση ηλεκτρονικού ταχυδρομείου:
Τηλέφωνο:
Αναφορά:
Εταιρεία:
Όνομα:

Δεν μοιραζόμαστε ούτε πουλάμε τις πληροφορίες σας σε κανέναν.
Μυστικότητα | Όροι

All major credit cards accepted as well as gov. p-cards

Η ιστορική τιμολόγηση για αυτό το προϊόν είναι μεταξύ 20.78 and 28.053 USD. Ανάλογα με την ποσότητα, τη διαθεσιμότητα, την κατάσταση, τον χρόνο παράδοσης και την πιθανή διακοπή ενός προϊόντος, δεν μπορούμε να εγγυηθούμε την τιμολόγηση μέχρι να σας παρέχουμε μια ενημερωμένη προσφορά.

Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
596-7409351-27
Αποστρατιωτικοποίηση:
No
Διάρκεια ζωής:
N/A
Μονάδα μέτρησης:
1 EA
NIIN:
014984820

Πληροφορίες ανταλλακτικού
Drawing calls this: shim, center rail, slide; upper/longer leg has two holes, 0.281 through countersunk 0.560 x 82 degrees, centered 1.031 inch from top and 1.000 from each end; horizontal leg has three holes, 0.281 thru, cs 0.560 x 82 deg, centered 0.437 from l bend, spaced 3.000, 9.500, and 16.000 from left edge, and two pilot holes. 0.190 thru, centered on same lengthwise line, spaced 2.000 inches from each end

NSN
Εθνικός αριθμός αποθέματος:
9390-01-498-4820 9390014984820
TXT
Περιγραφή:
Nonmetallic Angle
INC
INC
Κωδικός ονόματος στοιχείου:
30217
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Angle
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
94.0 rockwell m
MRC:
The maximum load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.AASH
Min. Tensile Strength (psi):
10 kilograms per square centimeter
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
257.0 degrees fahrenheit
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
2.092 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.781 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
19.000 inches
MRC:
None.ADXL
Left Side Flange Thickness:
0.188 inches
MRC:
None.ADXZ
Left Inside Angle In Deg:
90.0
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Weather resistant
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Seawolf class ssn; plunger assembly
MRC:
None.AJGP
Base Flange Thickness:
0.218 inches
MRC:
The style designation corresponding to the shape of the left-side flange tip.BHQU
Left-side Flange Tip Style:
Left square end
MRC:
The style designation corresponding to the shape of the base flange tip.BHQV
Base Flange Tip Style:
Base square end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic, acetal-delrin composition 100 af

Όμοιος Nonmetallic Angles

« Miscellaneous Fabricated Nonmetallic Materials {lang[catalog]}
Σύγκριση τώρα»
Σαφής | Κρύβω