Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
6931024-1
Μονάδα μέτρησης:
No qup EA
Πληροφορίες ανταλλακτικού
Pin, metering
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Headed Grooved Pin
Κωδικός ονόματος στοιχείου:
02382
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Double chamfer
MRC:
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.AAVL
Pilot Diameter:
0.400 inches
MRC:
The length of the pilot,which is the unthreaded portion beyond the thread used to guide the item.AAVM
Pilot Length:
1.500 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
0.652 inches
Under Head Length:
Between 4.980 inches and 5.020 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
One end drilled
First Hole Diameter:
0.187 inches
Distance From Centerline Of Hole To End Of Pin:
4.500 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Piston sub-assembly, hydraulic
First End Taper Length:
1.500 inches
First End Taper Angle:
5.0 degrees
Pin Head Diameter:
1.000 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Holes for 6931022 item no. 13 drilled in head .25 in.Down: 2 times x .12 in radius x .12 in dp
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.480 inches and 0.500 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy 606 or copper alloy 614 or copper alloy 630 or copper alloy 642
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-c-00465 federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
