Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
7054071
Πληροφορίες ανταλλακτικού
Shim, swivel fixture
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Plate Spacer
Κωδικός ονόματος στοιχείου:
26979
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.405 inches and 0.412 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
4.500 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
2.250 inches
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
0.250 inches
MRC:
A measurement of the center to center distance between the bolt holes along the width.ADUY
Center To Center Distance Between Bolt Holes Along Width:
1.625 inches
Outside Edge To Bolt Hole Center Distance Along Width:
Between 0.297 inches and 0.327 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
6
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Heavyweight engine housing maint, stand
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
All measurements are taken after anodize finish; suface roughness- machined surfaces to be 125 underscore check mark in accordance with ansi/asme b46.1; center to center distance between bolt holes along length are not equal, one distance is 1.625 in, the second 1.375 in; the distance from the outside edge to bolt hole center along length is 0.500in and 1.000 in respectively; the outside corner bevel edge is 0.250 in x 45 degrees on each of four corners; part to be used on maintenace stand for an internal combustion engine used in a (heavyweight) or larger torpedo
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Alloy 6061-t6 astm b209 assn standard all material responses
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Sae ams-a-8625 assn standard all treatment responses
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular w/bolt holes
