Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
707015
Πληροφορίες ανταλλακτικού
Hole through length of shaft 0.700 in. Id; 2nd end has internal involute splines
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Shouldered Shaft
Κωδικός ονόματος στοιχείου:
22914
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Plain
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Splined (involute)
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
0.886 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
1650-01-136-0549
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
1.0500 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
1.2670 inches
MRC:
A measurement of the longest dimension of the second end spline,in distinction from width.AMGA
Second End Spline Length:
0.605 inches
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the second end spline,and terminates at the circumference.AMGB
Second End Spline Minor Diameter:
1.0900 inches
MRC:
The length of a straight line which passes through the center of the largest circular cross section of the second end spline,and terminates at the circumference.AMGC
Second End Spline Major Diameter:
1.2670 inches
Second End Pressure Angle:
30.0 degrees
MRC:
A measurement indicating the diameter-pitch per measurement scale of the second end.AMGF
Second End Pitch Diameter:
1.2000 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
3
Second End Spline Quantity:
24
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
1.267 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
