Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
7913714-01
Πληροφορίες ανταλλακτικού
Tape, polyimide, silicone adhesive, pressure-sensitive
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Pressure Sensitive Adhesive Tape
Κωδικός ονόματος στοιχείου:
11212
MRC:
The appearance of the surface of an item as to its reflecting qualities.ABSW
Surface Luster:
Lusterless
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Astor airborne radar
MRC:
A nominal measurement taken at right angles to the length of an item,in distinction from thickness.AKGF
Width:
0.500 inches
MRC:
A nominal measurement of the longest dimension of an item,in distinction from width.AKGG
Length:
36.0 yards
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.AZKQ
Tempurature Rating:
Between -100.0 degrees fahrenheit and 400.0 degrees fahrenheit
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
12 pounds per square inch
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.CRZG
Nominalthickness:
1.0 millimeters
MRC:
Indicates the location of the adhesive on the item.CSJX
Adhesive Location:
One side
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
High-termperature, polyimide film coated on one-side with a silicone pressure-sensitive adhesive; shelf life shall be a of 12 months when stored in original, unopened container
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Yellow
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyimide
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-p-46112, grade a military specification single material response
