Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
81037
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Flexible Drive Shaft
Κωδικός ονόματος στοιχείου:
20367
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.188 inches err-100
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
9.125 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
0.150 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
12
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
0.250 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.AGQM
Endlength:
0.938 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.AGQM
Endlength:
2.000 inches
MRC:
The element,compound,or mixture of which the shaft is fabricated.ANBM
Shaft Material:
Steel
MRC:
A designation indicating the size by which the item is commercially known and/or identified.APGG
Size Designator:
0.750 in. Across flats
MRC:
Indicates the type of unit.APQB
Unit Type:
Wire wound
MRC:
Indicates the type of end.APTD
End Type:
Gear
MRC:
Indicates the type of end.APTD
End Type:
Round, internal splined
MRC:
A measurement of the spline pitch of the item.ASAP
Spline Pitch:
48
MRC:
The pressure angle of the spline,expressed in degrees.AXFG
Spline Pressure Angle In Deg:
14.500
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
0.250 inches
MRC:
A measurement of the distance from one side to the opposite side of the cross section of an item and the location.CFQW
Cross Section Size And Location:
0.406 inches diameter
MRC:
The number of unthreaded securing holes provided.CFRC
Err Default:
Err default
MRC:
The number of unthreaded securing holes provided.CFRC
Unthreaded Securing Hole Quantity:
2
MRC:
Indicates the location of the unthreaded securing hole(s) on the item.CFRD
Err Default:
Err default
MRC:
Indicates the location of the unthreaded securing hole(s) on the item.CFRD
Unthreaded Securing Hole Location:
Spaced 1-1/2 in. C to c approx, one hole offset 5/16 in. Approx
