Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
8353245x1357d1
Πληροφορίες ανταλλακτικού
CIRC-UI-TCA-RDAS
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Circuit Card Assembly
Κωδικός ονόματος στοιχείου:
61638
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
6.312 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
1.500 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
4.562 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
6525-01-099-2320 x-ray apparatus dental; siemans heliodent 70
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Major components: printed wiring board 1; variable resistor 1; resistor 30; relay 4; bridge rectifier 1; fuse 2; fuseholder 2; jumper wire 1; transistor 8; transformer 1; capacitor 9; diode 11; pin connector male 21; terminal block 1; mounting holes 3; mounting configuration: three 0.187 in. Diameter mounting holes on 3.250 in. By 3.750 in. Mounting centers; cubic measure: 43.201 cubic in; exterior container quantity: 1; special test features: dual cycle 50 and 60 hz operation; unit of issue, cube: 0.03 cubic ft; unit of issue weight: 0.25 lb; fsc application data: timer x-ray apparatus
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
25088-8353245x1357d1 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
