Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
86-2814166-1
Μονάδα μέτρησης:
No qup EA
Πληροφορίες ανταλλακτικού
Cover safety pdp
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Access Cover
Κωδικός ονόματος στοιχείου:
29785
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.220 inches and 0.226 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
10.000 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
7.000 inches
Hole Quantity Along Length:
3
Hole Quantity Along Width:
2
Distance Between Holes Along Length:
2.500 inches
Distance Between Hole Centerline And First Hole Along Length:
3.625 inches
Distance Between Hole Centerline And First Hole Along Width:
4.125 inches
Distance From First Hole Centerline To End Along Length:
4.125 inches
Distance From First Hole Centerline To End Along Width:
5.500 inches
Corner Hole Centerline Radius:
0.250 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.093 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Special
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
NETR-WO-RKM-ANAG
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Style differs by having a cutout feature of 2.0 inches x 3.75 inches along length edge of one side; 5 mounting holes have stated diameters and 12 havediameters between 0.182 and 0.192 inches; those 12 holes are set up in groups of 3 and placed 6 each on lines at points 1.125 and 3.375 inches along lengthedge on opposite side of cut out; each set of 3 holes is placed 0.750 inches apart and the sets are placed 1.950 inches apart
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polycarbonate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
A-a-59502, type 2, class 2 assn standard single material response
