Αριθμός ανταλλακτικού 87832-1651ITEM10

Shouldered Shaft

Τιμολόγηση και διαθεσιμότητα

Υποβάλετε αυτήν τη φόρμα για τις τρέχουσες τιμές και τη διαθεσιμότητα αυτού του NSN.
Αριθμός ανταλλακτικού:
Ποσότητα:
Διεύθυνση ηλεκτρονικού ταχυδρομείου:
Τηλέφωνο:
Αναφορά:
Εταιρεία:
Όνομα:

Δεν μοιραζόμαστε ούτε πουλάμε τις πληροφορίες σας σε κανέναν.
Μυστικότητα | Όροι

All major credit cards accepted as well as gov. p-cards

Η ιστορική τιμολόγηση για αυτό το προϊόν είναι μεταξύ 1231.66 and 1662.741 USD. Ανάλογα με την ποσότητα, τη διαθεσιμότητα, την κατάσταση, τον χρόνο παράδοσης και την πιθανή διακοπή ενός προϊόντος, δεν μπορούμε να εγγυηθούμε την τιμολόγηση μέχρι να σας παρέχουμε μια ενημερωμένη προσφορά.

Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
87832-1651item10
Αποστρατιωτικοποίηση:
No
Διάρκεια ζωής:
N/A
Μονάδα μέτρησης:
1 EA
NIIN:
011233015

Πληροφορίες ανταλλακτικού
Second end has two ident indented flats, 0.125 in. Flat dp, 1.000 in. Flat lg, 1.440 in. Distance from flat ctr to end, 180 degrees angle btwn flats; second end bored, 0.751/0.752 in. Dia, 2.120 in. Lg; second end has one int flat keyway along bore lg, 0.188/0.190 in. Keyway w, 1.940 in. Keyway lg, 0.102 in. Keyway dp

NSN
Εθνικός αριθμός αποθέματος:
3040-01-123-3015 3040011233015
TXT
Περιγραφή:
Shouldered Shaft
INC
INC
Κωδικός ονόματος στοιχείου:
22914
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Square (round corners)
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Two cross drilled holes
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
8.310 inches
MRC:
The distance from one flat to the opposite flat of the first end.ACKY
First End Width Across Flats:
Between 0.621 inches and 0.623 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 0.7470 inches and 0.7490 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
1.5000 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the second end,and terminates at the circumference.AMGS
Second End Hole Diameter:
0.2500 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the second end,and terminates at the circumference.AMGS
Second End Hole Diameter:
0.2810 inches
MRC:
None.AMGT
Second End Distance From Hole Center To End:
1.440 inches
MRC:
None.AMHS
Second End Distance Between Hole Centers:
0.560 inches
MRC:
None.AMHZ
Second End Angle Between Holes:
90.0 degrees
MRC:
The number of steps provided.ATPC
Step Quantity:
2
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
1.500 inches
MRC:
None.CSQZ
First End Step Length:
1.250 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 304
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-769, cond b federal specification single material response

Όμοιος Shouldered Shafts

« Miscellaneous Power Transmission Equipment {lang[catalog]}
Σύγκριση τώρα»
Σαφής | Κρύβω