Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
9290239
Πληροφορίες ανταλλακτικού
24 holes 0.812 diameter bevel face
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Cone Pulley
Κωδικός ονόματος στοιχείου:
08110
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
2.169 inches
MRC:
The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.AAWY
Counterbore Diameter:
2.600 inches
MRC:
The depth of the process used to enlarge part of a hole.AAWZ
Counterbore Depth:
0.380 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
2.560 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
16
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.ABSC
Spline Minor Diameter:
1.881 inches
MRC:
The length of a straight line which passes through the center of the large end,and terminates at the outside circumference.AHMG
Large End Outside Diameter:
10.250 inches
MRC:
The length of a straight line which passes through the center of the small end,and terminates at the outside circumference.AHMH
Small End Outside Diameter:
8.609 inches
MRC:
Indicates the type of face provided.ALPN
Face Type:
Tapered cone
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Steel, mil-s-6758
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.AQPL
Face Width:
0.750 inches
MRC:
The physical configuration of the item.ARJD
Design Form:
Plain
MRC:
Indicates the type of bore used on the item.ASBP
Bore Type:
Involute spline
MRC:
The pressure angle of the spline,expressed in degrees.AXFG
Spline Pressure Angle In Deg:
30.0
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
0.370 inches
MRC:
An indication of whether or not a counterbore feature is included.AXND
Counterbore Feature:
Included
MRC:
A measurement of the spline pitch diameter.BDTX
Spline Pitch Diameter:
2.000 inches
MRC:
Indicates the location of the counterbore on the item.BDYS
Counterbore Location:
Bb end
MRC:
An indication of whether or not a split hub feature is included.BSYG
Split Hub Feature:
Not included
MRC:
An indication of whether or not a lightening hole/s/ is included.BXSJ
Lightening Hole:
Included
MRC:
An indication of whether or not an integral cooling vane(s) is included.BXSK
Integral Cooling Vane:
Not included
MRC:
An indication of the characteristic of the protruding hub.BYDZ
Protruding Hub Characteristic:
Grooved
MRC:
Indicates the location of the groove or step on the item.BYFB
Groove/step Location:
Aa end
MRC:
An indication of whether or not a bore bearing is included.BYFS
Bore Bearing:
Not included
Hub End Outside Diameter And Location:
2.750 inches aa end and 3.300 inches bb end
Distance From Outside Flange/rim To Hub End And Location:
1.810 inches aa end and 0.380 inches bb end
MRC:
The diameter and location of the first end groove.BYZR
First End Groove Diameter And Location:
2.380 inches aa end
MRC:
The width and location of the first end groove.BYZS
First End Groove Width And Location:
0.320 inches aa end
MRC:
The length from the grove to the end and its location on the first end.BYZT
First End Length From Groove To End And Location:
0.240 inches aa end
MRC:
The outside diameter and location of the hub end.CLYR
Hub End Outside Diameter And Location:
2.750 inches aa end
MRC:
The distance from the outside flange or rim to the hub end, and its location.CLYS
Distance From Outside Flange/rim To Hub End And Location:
1.810 inches aa end
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Enamel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Plain
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects a surface.SURF
Surface Treatment:
Enameled
