Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
9m702-5a1
Μονάδα μέτρησης:
No qup EA
Πληροφορίες ανταλλακτικού
Clamp, block-tube support, plastic
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Section Block Clamp
Κωδικός ονόματος στοιχείου:
39404
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
2.124 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.575 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 0.250 inches and 0.261 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
1
Distance From Center Of Mounting Hole To Edge Along The Width:
0.288 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F18 e/f
MRC:
The facility for mounting the item.AZGM
Mounting Facility:
Unthreaded hole
MRC:
A measurement from the bottom to the top of a block,in distinction from depth.BYGG
Block Height:
0.630 inches
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Agav
MRC:
The number of clamping holes provided.CWTD
Clamping Hole Quantity:
2
MRC:
The length of a straight line which passes through the center of a clamping hole,and terminates at the circumference.CWWM
Clamping Hole Diameter:
0.766 inches all holes
Distance From End To First Mounting Hole Center:
1.062 inches
Distance From End To First Clamping Hole Center:
0.469 inches
Center To Center Distance Between First And Second Clamping Holes:
1.186 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Material-nylon, class filled per p.S. 14280, grade b, class
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rectangular
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
A quantity of two blocks must be specified for each installation (top and bottom)
