Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
a31u19318-5
Πληροφορίες ανταλλακτικού
Cable assembly tlc 50 ohm
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Electrical Ribbon Cable Assembly
Κωδικός ονόματος στοιχείου:
66492
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Missile, patriot
MRC:
The center to center distance between the terminal holes.AGTK
Center To Center Distance Between Terminal Holes:
0.100 inches
MRC:
Indicates the type of facility provided on the device for attaching to another item.AKRZ
Termination Type:
Connector receptacle both ends all conductors
MRC:
The number of electrical conductors included on the item.AMQN
Conductor Quantity:
25
MRC:
The fabricated form of the conductor.CXCW
Conductor Form:
Solid all conductors
MRC:
The designation used to describe the round stranded or round solid conductor size.CXDC
Round Conductor Size:
30 awg all conductors
MRC:
The arrangement and number of arrangements of the conductors.CXDQ
Conductor Arrangement And Quantity:
25 molded
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Housing contains standard pressure copper alloy receptacle contacts plated w/ 0.000030 min inch thick gold over 0.000050 min inch thick nickel in mating area; p2 connector must mate and latch to amp part no 1-102158-0; p1 and p2 connector housing shall be thermoplastic; housing is 50 position header; pull tabs shall be provided; cable shall be 50 ohm transmission line cable; 25 signal conductors 30 awg silver plated copper; 50 grnd conductors 32 awg silver plated copper; 50 +-5 ohm impedance; 28 pico-farads per foot capacitance; 14 nano seconds per foot propagation delay; pin 1 shall be clearly marked on p1 and p2; resistance of cable assembly shall be less than .21 ohms for signal conductors and less than .18 ohms for grnd conductors; cable assemblies shall be able to withstand 300 vdc between any adjacent signal and/or grnd paths; impedance of cable assembly shall be 50 +-5 ohms
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper core conductor all conductors
MRC:
An indication of the precious material and its location in the item.PMLC
Precious Material And Location:
All connectors plated with .000030 min thick gold gold and all conductors plated with silver silver
MRC:
Identification of the precious material contained in the item.PRMT
Precious Material:
Gold and silver
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Silver core conductor all conductors
