Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
cf514
Πληροφορίες ανταλλακτικού
Damper spring encasement provision included; integral hub included
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Vehicular Clutch Disk
Κωδικός ονόματος στοιχείου:
52060
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
0.760 inches
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
0.945 inches
MRC:
The length of a straight line which passes through the center of an item,and terminates at the outside circumference.ABHE
Outside Diameter:
8.000 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
0.700 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
0.070 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
0.150 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
10
MRC:
Indicates the design type of the item.APGF
Design Type:
Dry
MRC:
Indicates the location of the item to which a specific material is applicable.AQQF
Material Location:
Both sides
MRC:
The physical configuration of the item.ARJD
Design Form:
Solid
MRC:
Indicates the type of spline provided.AXYS
Spline Type:
Straight
MRC:
Indicates the type of disk.BPLM
Disk Type:
Plain
MRC:
Indicates the type of asbestos composition provided.BSPF
Asbestos Composition Type:
Metal impregnated
MRC:
The length of a straight line which passes through the center of the material,and terminates at the outside circumference.BSPG
Material Outside Diameter:
8.500 inches
MRC:
The length of a straight line which passes through the center of the material,and terminates at the inside circumference.BSPH
Material Inside Diameter:
5.375 inches
MRC:
The means by which the facing is attached.BSPL
Facing Attachment Method:
Riveted
MRC:
The number of damper springs provided.BSPN
Damper Spring Quantity:
6
MRC:
The distance from the flywheel face to the rear of the hub.BSPT
Distance From Flywheel Face To Rear Of Hub:
0.725 inches
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Friction material facing and material facing groove
MRC:
The structural characteristic of the item.CQCF
Construction:
Solid
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.CYBJ
Disk Material:
Steel
MRC:
Flexible,capable of being bent,turned or twisted,within limits,without breaking,or rigid,resisting change of form,inflexible.FLEX
Flexibility:
Flexible
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Asbestos
