Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
gl93a
Μονάδα μέτρησης:
* special requirements. EA
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Engine Accessory Generator
Κωδικός ονόματος στοιχείου:
17311
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.375 inches
MRC:
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.AAVL
Pilot Diameter:
2.750 inches
MRC:
Items furnished as accessories which are not specified elsewhere.ABFF
Furnished Items:
Nut
Second Step Diameter:
1.062 inches
Unthreaded Portion Length:
0.938 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the mounting.ADER
Mounting Style:
Flange mtd w/two mtg holes
Pilot Height:
0.562 inches
MRC:
An indication of whether or not an item is capable of operation while submerged.AHZV
Submersibility:
Nonsubmersible
MRC:
The direction of rotation of a rotating shaft as viewed from the drive end.AKCT
Shaft Rotation Direction:
Clockwise or counterclockwise
MRC:
The length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AWDP
Thread Diameter:
0.688 inches
MRC:
The means by which the item is grounded.BCGN
Grounding Method:
Internal
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft drive end.BCGS
Shaft Drive End Style:
Straight shaft end, threaded
Distance Between Shaft Center And Bottom Mounting Hole Center:
4.250 inches
Distance Between Shaft Center And Top Mounting Hole Center:
3.750 inches
Angular Deviation Of First Hole From Top Center In Deg:
0.0
Angular Deviation Of Second Hole From First Hole In Deg:
0.0
Top Mounting Hole Diameter:
0.375 inches
Bottom Mounting Hole Diameter:
0.438 inches
MRC:
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.BZRR
Thread Series:
Unef
MRC:
A numeric-alpha designator indicating the pitch-diameter tolerance and the external or internal location of the thread.CFHL
Thread Class:
2a
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
24
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
6.0
