Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
h4320-218-3393
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Wearing Ring
Κωδικός ονόματος στοιχείου:
22534
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Internal flange w/external locking flange
MRC:
A measurement of the longest dimension of the chamfer,in distinction from width.AAZP
Chamfer Length:
0.062 inches outside left corner
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
0.969 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
Between 2.996 inches and 2.998 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
Between 2.468 inches and 2.470 inches
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
0.062 inches inside left corner
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
0.625 inches inside right corner
Left Side Flange Thickness:
0.156 inches
Right Side Flange Thickness:
0.188 inches
Distance Between Flanges:
Between 0.625 inches and 0.627 inches
End To Flange Distance:
0.812 inches
Internal Flange Inside Diameter:
1.812 inches
Internal Flange Width:
0.406 inches
Smallest External Anchor Flange Radius:
1.438 inches
Largest External Anchor Flange Radius:
1.688 inches
Distance Below Centerline:
0.062 inches
Distance From End:
0.312 inches
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Chamfered outside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Round inside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Round inside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square outside right corner
MRC:
The included angle of the chamfer(s).CSYT
Chamfer Angle:
22.5 degrees outside left corner
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-c-390, alloy d2 federal specification single material response
