Αριθμός ανταλλακτικού HL227-6-10

Solid Rivet
Διαθεσιμότητα αποθεμάτων  Κωδικοί κατάστασης προϊόντος

Αριθμός ανταλλακτικού hl227-6-10 είναι σε απόθεμα στις ακόλουθες ποσότητες και συνθήκες.

  • NS: 1524
  • NE: 1305

Σημείωση: Η διαθεσιμότητα αυτού του στοιχείου ενημερώθηκε τελευταία φορά 01/04/2023 και μπορεί να έχουν αλλάξει από τότε. Ζητήστε προσφορά για ενημερωμένες τιμές και διαθεσιμότητα.

Τιμολόγηση και διαθεσιμότητα

Υποβάλετε αυτήν τη φόρμα για τις τρέχουσες τιμές και τη διαθεσιμότητα αυτού του NSN.
Αριθμός ανταλλακτικού:
Ποσότητα:
Διεύθυνση ηλεκτρονικού ταχυδρομείου:
Τηλέφωνο:
Αναφορά:
Εταιρεία:
Όνομα:

Δεν μοιραζόμαστε ούτε πουλάμε τις πληροφορίες σας σε κανέναν.
Μυστικότητα | Όροι

All major credit cards accepted as well as gov. p-cards

Η ιστορική τιμολόγηση για αυτό το προϊόν είναι μεταξύ 39.86 and 53.811 USD. Ανάλογα με την ποσότητα, τη διαθεσιμότητα, την κατάσταση, τον χρόνο παράδοσης και την πιθανή διακοπή ενός προϊόντος, δεν μπορούμε να εγγυηθούμε την τιμολόγηση μέχρι να σας παρέχουμε μια ενημερωμένη προσφορά.

Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
hl227-6-10
Αποστρατιωτικοποίηση:
No
Διάρκεια ζωής:
N/A
Μονάδα μέτρησης:
25 EA
NIIN:
016035448

Πληροφορίες ανταλλακτικού
Pin, rivet

NSN
Εθνικός αριθμός αποθέματος:
5320-01-603-5448 5320016035448
TXT
Περιγραφή:
Solid Rivet
INC
INC
Κωδικός ονόματος στοιχείου:
00861
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
0.625 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Hexagon countersunk
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
0.047 inches
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
0.189 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.AAZF
Shank Style:
Drive pin
MRC:
None.AAZG
Head Major Diameter:
0.188 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
B1-bacft
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
0.301 inches
MRC:
The included angle of the countersink.CRSQ
Countersink Angle:
0.010 degrees
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
100 degree flush crown shear head 0.062 grip variation
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Titanium

Όμοιος Solid Rivets

« Rivets {lang[catalog]}
Σύγκριση τώρα»
Σαφής | Κρύβω