Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
m3-2050k2
Πληροφορίες ανταλλακτικού
Item has manufacturer's name and logo on the front
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Tuning Fork Resonator
Κωδικός ονόματος στοιχείου:
11269
MRC:
The number of terminals for providing electrical connection to the item.AARA
Terminal Quantity:
5
MRC:
Indicates the type of terminals for providing electrical connection to the item.AARB
Terminal Type:
Solder lug
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.766 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.391 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.562 inches
MRC:
The number of holes/slots or studs provided for attaching the item to a surface.ADAE
Mounting Hole/stud Quantity:
2
MRC:
A measurement of the longest dimension of the mounting stud,in distinction from width.ADAG
Mounting Stud Length:
0.219 inches
MRC:
The measured distance between the mounting hole and/or stud centers.ADAH
Center To Center Distance Between Mounting Holes/studs:
0.312 inches and 1.016 inches
MRC:
A measurement of volume taken by multiplying the length by the width by the height of an item and rendered in cubic units.AFJK
Cubic Measure:
0.4 cubic inches
MRC:
The frequency at which an item will respond with maximum amplitude.AJCS
Resonant Frequency:
2050.0 kilohertz
MRC:
An indication of whether or not a hermetically sealed case is included.ASLA
Hermetically Sealed Case:
Included
MRC:
The measured weight of an item unencumbered by packaging or packing material.AWJN
Unpackaged Unit Weight:
0.050 pounds
MRC:
The means of attaching the item.AXGY
Mounting Method:
Threaded stud
MRC:
Designates the size of the hole and/or stud for mounting the item.BHYJ
Mounting Hole/stud Size:
Unc-2a; 2-56
MRC:
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.SPCL
Special Test Features:
Tested for altitude, humidity, sand, and dust
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
accuracy over temperature range degree celcius is plus or minus .01 percent; 0 to plus 55
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
95267-mil-g-9858 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
