Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
tca.45-2350
Μονάδα μέτρησης:
No qup EA
Πληροφορίες ανταλλακτικού
Direct drive round column drill presses w/mechanical clutch
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Upright Drilling Machine
Κωδικός ονόματος στοιχείου:
03945
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Bench
MRC:
Indicates the type of head provided.AJGD
Head Type:
Fixed
MRC:
The means used to operate the item.APHE
Operation Method:
Manual
MRC:
Indicates the type of feed provided.AQDD
Feed Type:
Hand
MRC:
The number of spindles provided.BCRH
Spindle Quantity:
1
MRC:
Indicates the type of main drive provided for turning,rotating,or positioning the mechanism.BNQL
Main Drive Type:
Electric motor
MRC:
The distance the spindle will travel.BNRL
Spindle Travel Distance:
9.000 inches
MRC:
The drilling capability/ies/ of the item.BNRY
Drilling Capability:
1-7/8 inch in cast iron and 1-3/4 inch in steel
MRC:
Indicates the type of column provided on the item.BNRZ
Column Type:
Round
MRC:
The distance from the center of the spindle to the column.BNSD
Distance From Spindle Center To Column:
14.000 inches
MRC:
Indicates the type of base working surface provided on the item.BNSF
Base Working Surface Type:
Slotted
MRC:
The physical configuration of the base working surface.BNSG
Base Working Surface Shape:
Rectangular
MRC:
Indicates the location of the item on which the base working surface is mounted.BNSL
Base Working Surface Mounting Location:
Base
MRC:
The maximum distance from the chuck or spindle nose to the base working surface.BNSM
Maximum Distance From Chuck/spindle Nose To Base Working Surface:
49.000 inches
MRC:
Indicates the type of spindle provided.BQLR
Spindle Type:
Turret head
MRC:
The number of spindle speeds provided.BTSZ
Spindle Speed Quantity:
9
MRC:
The minimum to maximum speed limits of the spindle,expressed in revolutions per minute.BTTB
Spindle Speed Range In Rpm:
+82.0/+1524.0
MRC:
The number of alternating current phases.FAAZ
Phase:
Three
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Automatic tool ejector; manual quill lock; coolant system; low voltage at switch; 45 degrees tilting table, right or left
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.0
