Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
529x134566
Πληροφορίες ανταλλακτικού
Special tube-in-tube design 9/16 diameter heater for marlo coil
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Immer Electrical Heating Element
Κωδικός ονόματος στοιχείου:
11327
MRC:
The style designation indicating the configuration that most nearly corresponds to the mounting method of the item.AALX
Mounting Method Style:
Flange type mounting facility
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Cartridge type
MRC:
The number of terminals for providing electrical connection to the item.AARA
Terminal Quantity:
2
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.245 inches and 0.255 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 50.875 inches and 51.375 inches
MRC:
The length of that portion of the heating element that imparts heat.ABHS
Effective Heating Length:
Between 40.375 inches and 40.875 inches
MRC:
An indication of the radiation spectrum of the element.ABJA
Element Radiation Specificationtrum:
Noninfrared
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the element connection.ABJS
Element Connection Style:
Wire lead
MRC:
A measurement of the longest dimension of a terminal,in distinction from width.ABJT
Terminal Length:
24.500 inches
MRC:
The environmental elements which a terminal box is designed to withstand satisfactorily.ABKF
Terminal Box Environmental Protection:
Moisture resistant
MRC:
A measurement of the longest dimension of a mounting facility,in distinction from width.ABKP
Mounting Facility Length:
Between 1.495 inches and 1.560 inches
MRC:
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the length.ABKQ
Center To Center Distance Between Mounting Facilities Parallel To Length:
Between 1.110 inches and 1.275 inches
MRC:
A measurement taken at right angles to the length of the mounting facility,in distinction from thickness.ABKS
Mounting Facility Width:
Between 1.495 inches and 1.560 inches
MRC:
The number of holes or slots included.ABKT
Hole Or Slot Quantity:
3
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.065 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
0.563 inches
MRC:
The number of heats at which the item will operate.ABNR
Heat Quantity:
1
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
Between 50.375 inches and 50.875 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Seawolf class ssn; plo acoustic
MRC:
The maximum rated power that an item can safely consume or provide,measured in watts.AZQH
Maximum Wattage Rating In Watts:
1050.0 single voltage
MRC:
The number of elements in the item.BHHK
Element Quantity:
12
MRC:
The total electrical voltage,expressed in volts,and the type of current whether alternating or direct.CSBH
Voltage In Volts And Current Type:
440.0 ac single voltage
MRC:
The number of alternating current phases.FAAZ
Phase:
Single single voltage
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Mounting flange made of 16ga, 304sst, tackwelded to tube; terminals are 18 ga. Exane leadwire with 0.875 inch long silicone rubber sleeving at flange; cavity is sealed with clear epoxy
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.000
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel sheath