Αριθμός ανταλλακτικού
Αποστρατιωτικοποίηση
Διάρκεια ζωής
UOM
NIIN
Αριθμός ανταλλακτικού:
cb3001-aa-3-8
Μονάδα μέτρησης:
No qup EA
Πληροφορίες ανταλλακτικού
Post, electri-mechanical equipment-locking thread, bonded
NSN
Εθνικός αριθμός αποθέματος:
TXT
Περιγραφή:
Spacing Threaded Standoff
Κωδικός ονόματος στοιχείου:
40280
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3b right internal
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand right internal
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.295 inches right internal
MRC:
The length of a straight line which passes through the center of a flange,and terminates at the circumference.ABKK
Flange Diameter:
1.250 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.140 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
Between 0.480 inches and 0.520 inches
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
1.050 inches
MRC:
A measurement of the longest dimension of the cross section,in distinction from width.ADWD
Cross-sectional Length:
1.250 inches
MRC:
A measurement of the cross section taken at right angles to the length,in distinction from thickness.ADWH
Cross-sectional Width:
0.625 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
DATA-PR-OCE-SSIN
MRC:
The geometric configuration of the item when viewed in cross section.ANLR
Cross-sectional Shape:
Elliptical
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
32 right internal
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.190 inches right internal
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Standoff having threaded insert of 0.1900-32unf-3b in post with diameterof 0.310 or 0.455 inches; having through (inspection) hole with diameter between0.062 and 0.070 inches located on body approximately 2 thread pitches from insert
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy or plastic
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-200/3 federal specification single material response or qq-a-225/6 federal specification single material response or qq-a-250/4 federal specification single material response or qq-a-200/8 federal specification single material response or qq-a-225/8 federal specification single material response or qq-a-250/11 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-a-8625, type 1, class 1 military specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Flanged with left internal thread
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf right internal
